DIY Handmade Wooden PC Case!

Comments: 539

  • Jake aka Remaggib
    Jake aka Remaggib 2 days ago

    Nothing you can do about drill bits ripping out extra wood? I find that very hard to believe

  • Rui PTG
    Rui PTG 4 days ago

    Im working on a wooden PC case too but I'm not cutting parts from my metal cases for it lol I'd rather stick with the metal case at that point.

  • jared robinson
    jared robinson 5 days ago

    20 hours for a box... What the fuck.

  • Jose Gonzales
    Jose Gonzales 15 days ago

    Could have used a router or a high set rotozip for the psu hole. J/S but is a good idea maybe a piece of Plexiglass for I a side window?

  • Timothy John Aguilar
    Timothy John Aguilar 15 days ago

    Looks terrible. Ever heard of Google SketchUp? Come on man.

  • Alex Paulsen
    Alex Paulsen 16 days ago

    This is much less impressive than he's trying to make it sound.

    I sacrificed a PC case once and fitted the ATX portion of the chassis into a draw in my desk. My flatmate has his ITX case fitted into where the draws were on his desk.

    This build however just looks lazy, like he had the ideas but then couldn't implement them properly. His original idea of drilling wood and mounting it directly is just stupid however, using a donor case for the ATX mounting standards is both time-saving and effective.

  • Wally Rebelparker
    Wally Rebelparker 25 days ago

    Cool!!!

  • Scott Hanvey
    Scott Hanvey Month ago

    I would love to see you make an open air test bench from wood!
    I want to make one and stain it cherry to match my furniture

  • Frighten98
    Frighten98 Month ago

    did they upload the finished case ?

  • Joe Bob
    Joe Bob Month ago

    love that biuld
    Im making a custom computer inside and old POWER MAC G5 – 2003 and I was wondering if anyone new how I should dimension the standoffs of an atx mother bored

  • CyberVirtual
    CyberVirtual Month ago

    A wooden test bench wood look a lot cooler if you know what I mean.

  • Devin Padilla
    Devin Padilla Month ago +1

    Of all the wood working book I`ve read, this “pepe amazing plan” (Google it) is the perfect. My wood working teacher proposes it to all of his scholars. I am amazed how authors managed to write very comprehensive topics. I am astonished by the material and did not have a difficult time following the tutorials.

  • Mr 1080
    Mr 1080 Month ago

    There is zero airflow, this is more of an oven then a case. It is shit

  • Lucylu0304
    Lucylu0304 2 months ago

    My god you guys are so picky. Leave the poor guy one for having a go

  • Lucylu0304
    Lucylu0304 2 months ago

    Where did you get the mount for the motherboard from

  • Nathanael Rittichier
    Nathanael Rittichier 2 months ago

    With just determination, time, $100+, and basic woodworking skills you too can make an unfinished wood box. Concept proved!

  • Brad Kirk
    Brad Kirk 2 months ago

    Just build a wooden case around another case and cut out slots for your DVD drive and card reader. Pull off the front panel and slip another case over it.

  • lebulkEnjoy
    lebulkEnjoy 2 months ago

    came here for a tutorial and was dissapointed

  • Carlos Martinez
    Carlos Martinez 2 months ago

    From where did you draw that diagram? you can give it to me

  • Clare Claratehia
    Clare Claratehia 2 months ago

    time to grill some Meat

  • Rmx2011
    Rmx2011 3 months ago

    It's a good idea but the execution is lacking, sorry bro.

  • Alex Romero
    Alex Romero 3 months ago

    i have everything except the wood (might have some wood that wasnt used during the contructions insdide my house over the years)

  • Griffin Brown
    Griffin Brown 3 months ago

    Please do a tutorial video

  • Max Renolds
    Max Renolds 4 months ago

    i would love to see a build a computer case

  • TROll Face
    TROll Face 4 months ago +1

    Great. needs some airflow that's all

  • Stefan Batrinache
    Stefan Batrinache 4 months ago

    Just throw your hardware in a fucking drawer, is the same thing.

  • onewaffleshort
    onewaffleshort 4 months ago

    this is actually really shit, step back from your work and check to see if its actually good guys. embarrassing

  • Akpro Oo
    Akpro Oo 4 months ago

    where can i buy this???!!!

  • Ryan Beeton
    Ryan Beeton 5 months ago

    This took 20 hours? Does that include the drive to the store and waiting in line at the register?

  • TK Tech Games and More
    TK Tech Games and More 5 months ago

    caselabs sells motherboard trays

  • jvirg
    jvirg 5 months ago

    this is out of style by about 150 years.

  • Hyrizon
    Hyrizon 5 months ago

    That's one shitty PSU

  • Holzbrett
    Holzbrett 5 months ago

    wow no airflow, no dustfilter, too much space wasted, "no lightning", no design. For the first case good work but could get a lot better;)

  • 9 Tails Kurama
    9 Tails Kurama 5 months ago

    can it burn?

  • Dont Panic Media Group
    Dont Panic Media Group 5 months ago

    Would love to see more wooden cases or heck, what about a DIY Cases playlist, not just wood but use other materials too

  • Azeem El Bey
    Azeem El Bey 5 months ago

    It looks nice to me! Has lots of potential.

  • TrisT
    TrisT 5 months ago

    "100$" FACEPALM

  • Dummerbrella987
    Dummerbrella987 5 months ago

    "I know it sounds a little crazy". No it doesn't, its been done lots of times. Get over yourself.

  • oCJDo
    oCJDo 6 months ago +1

    kys?

  • Trig Williamson
    Trig Williamson 6 months ago

    Kids these days are so useless. Nothing complicated about this project at all. Proof of concept??.... yes you can make things out of wood.

    He can't even drill a fucking hole!

  • DecibelAlex
    DecibelAlex 6 months ago

    this guy is not a very good carpenter

  • Brian Swartz
    Brian Swartz 6 months ago

    Needs grounding straps between components, PSU, ETC.

  • adobePC
    adobePC 6 months ago

    Not to be mean but when all is said and done I would not use this case for a multitude of reasons.

  • Jhonatan Jhones
    Jhonatan Jhones 6 months ago +1

    wtf did i just saw? bro ure so wrong...

  • scott Barstow
    scott Barstow 6 months ago

    use joints not screws :(

  • Apoc Banditz
    Apoc Banditz 6 months ago

    MS you need to help him, send him quality parts so this could be great

  • TotallyNotLogan
    TotallyNotLogan 6 months ago

    I'm kind of an idiot, so...

    Can someone tell me why this won't burn...?

  • Gamers Arena
    Gamers Arena 6 months ago

    for ur kind info it doesnt look beautiful from any angle...so plzz try to be honest wid ur opinions...btw nobody wants to tell bad things abt their handmade things... :(

  • Brynje
    Brynje 6 months ago

    would actually look pretty neat with a plexiglass panel at the side and a glow lightbulb inside instead of LEDs.

  • ArcExodus
    ArcExodus 7 months ago

    I plan on building a wood case with radiator support. Fan filter grills. SSD mounts. And a glass side panel. And I'm going to paint it black and put some USB 3.0 (or 3.1) front panel connections. And maybe SD card support. Any suggestions?

  • Joseph Stott
    Joseph Stott 7 months ago

    it's actually very money saving if you buy a bit of partical board and just screw everything to that... this is obviously for people who want their PC to look a certain way. But I don't know why you didn't dremel out some holes for ventilation. seems weird.

  • Nickword 1
    Nickword 1 7 months ago

    god you guys are so white...

  • zubir jangsi
    zubir jangsi 7 months ago

    i can see that he clearly reading a script. hahaha

  • pahaahv
    pahaahv 7 months ago +1

    It tore up some parts of the wood but there's nothing I could do about it. "It-guy" doing woodwork.

  • Zend Mij
    Zend Mij 7 months ago

    why use a groundplate? just screw the motherboard onto small wooden plates, and use a adhesive to bring it on the wooden case. No holes, nothing to hide afterwards and way les work.

    Nice wood, but everything looks very rough and unfinished.

  • BMWcarguyE36 Cars
    BMWcarguyE36 Cars 7 months ago

    Look at pc wars by techource with that natural looking wooden one that actually has leaves and a few vines over it. It's awesome!

  • uzamakii
    uzamakii 8 months ago

    did it catch on fire yet?

  • X_Franklin _X
    X_Franklin _X 8 months ago

    I actually like the look, it's p cool

  • Matt C
    Matt C 8 months ago

    Not the best looking thing. Very basic looking, just like a wooden box. Would be nice if it had some nice details all around the case. Also, maybe a glass window instead of it just open. It'd be nice to have some depth on the outside.

  • ozayevable
    ozayevable 8 months ago +5

    its no a case, its a box.

  • Carton
    Carton 8 months ago

    Can you make a tutorial

  • Wooden PC
    Wooden PC 8 months ago +4

    Did you called me?

  • Skulldriver101
    Skulldriver101 8 months ago

    i want to see another better one with a more in depth guide. also nice channel im subbing.

  • Leonardo Po
    Leonardo Po 8 months ago

    make one outta aluminum

  • yaro grigoriev
    yaro grigoriev 8 months ago

    -.- you just made a wooden box, flapped to it, and said done. Come on, you should have added on and used different wood for the sides, made your own SSD slots, and so on.

  • Bob Mclean
    Bob Mclean 8 months ago

    good idea to start from scratch again, that case looks like shit...

  • Ranu Sharma
    Ranu Sharma 8 months ago

    brother i am thankfull for you. i like your idea too much

  • Kai Song See
    Kai Song See 8 months ago

    A perfectly decent case being "salvaged for parts" to put in a wooden box?? No thanks

  • NitroN_
    NitroN_ 9 months ago

    doesn't look that clean, looks like an old shelf/coffin/idk

  • Rize
    Rize 9 months ago

    Ewww

  • Gonzalo Marsilli
    Gonzalo Marsilli 9 months ago +2

    sorry but this is ugly.

    • voltrox
      voltrox 2 months ago

      Uhm What 😂 lol


    • Uhm What
      Uhm What 8 months ago

      +Gonzalo Marsilli Bro it's wood. What fucking design


    • Gonzalo Marsilli
      Gonzalo Marsilli 8 months ago

      IDK nah its just a cube with no design


    • Uhm What
      Uhm What 8 months ago

      It's the wood.


  • Antonetta Kowalewski
    Antonetta Kowalewski 9 months ago

    I think you need to take some time and go to woodprix website to learn how to make it.

  • Jooosh
    Jooosh 10 months ago

    I want to see another case and how to make it

  • Travis Nicely
    Travis Nicely 10 months ago

    I have read all the comments, and there pretty correct: bad execution. I think it's a lack of knowledge after seeing a desktop computer transplanted onto a wooden plate with parts of the computer glued and stuck, that got cut off the original desktop. No originality, you just remade the desktop you cut up, but bigger and horrible looking. Why not make it complete your, and don't use any parts from the desktop.

  • David Nguyen
    David Nguyen 10 months ago

    don't bother. looks horrible

  • Marek Wójcik
    Marek Wójcik 10 months ago

    pojeby

  • Squidiot -
    Squidiot - 10 months ago

    ugly af

    • Uhm What
      Uhm What 8 months ago

      The thing is can you do better


  • Zailon Xwadastet
    Zailon Xwadastet 10 months ago

    very ambitious, ive been wanting to make myself a case out of nothing but plexiglass

  • Brandon Hazlett
    Brandon Hazlett 10 months ago

    You should try to make the front panel look like an actual front panel

  • MD Rehman
    MD Rehman 10 months ago

    shut the fuck up....

  • MrDigitalben
    MrDigitalben 11 months ago

    I'd like to see a second case

  • Baum Kuchen
    Baum Kuchen 11 months ago

    This case is a mess. You can say the aesthetics was your priority all you want, but your work is saying something else. Just look at the salvaged motherboard mount plate. You simply took normal wood screw and screwed that poor motherf***er to the wood and didnt care you bent it. PSU mounting ? You made a hole without any planning at all, which is now by accident preventing the PSU from moving... yeah good enough, leave it like that. There is no problem in not making a perfect case. The problem is in you obviously making cheap quick "case build" just for the sake of posting new video to you "tech" channel.

  • rea LLY
    rea LLY 11 months ago

    Make a tuturial

  • Ivan Gabriel
    Ivan Gabriel 11 months ago

    Awesome but airflow lol.

  • pantera tanker
    pantera tanker 11 months ago +2

    thats pretty cool. make me one now XD

  • Tyler Travis
    Tyler Travis 11 months ago

    I think you just inspired me to try this

  • Rob Swope
    Rob Swope 11 months ago +2

    natural maple with a bit of glaze, a tempered glass window, and a psu basement would look sick.

  • RODDYGINGER
    RODDYGINGER 11 months ago

    You should've used an MDF board, way cheaper than actual wood

  • William Bishop
    William Bishop Year ago

    Very rough looking. I'd redo it.

  • Luka Didović
    Luka Didović Year ago

    hahahahahaha this is too funny

  • Custom Hardware
    Custom Hardware Year ago

    I managed to build my own wooden pc case, with a glass window too. It only cost me 100$, with the components too. It doesn't look the best, mostly because half of the time i didn't know what i wanted to do. I just wanted to let you know that because of you it was built, I saw your video some time ago and because i had some free time i started working. Made a video on my channel, check it out if you want!

  • happysmash27
    happysmash27 Year ago

    I want to know how to make it myself.

    • Custom Hardware
      Custom Hardware Year ago

      I saw this video some time ago, and i wanted to build one myself, no instruction, just logic man. Just a few days ago I finished my wooden case. I have a video on it on my channel, check it out maybe you get some ideeas


  • Leon Trotsky
    Leon Trotsky Year ago +6

    Don't talk shit if you can't do better wood working alone is something not many people know how to do wood working yes he could have done better I would have used wood filler where the wood got tore up where he drilled them, I would have sanded and polyed the out side and then used 400 sand paper on the outside then 1000 grit to make the outside of it shine, and then I would have made it like it was a table because it might end up warping on the top.

    • NitroN_
      NitroN_ 9 months ago

      still doesn't change the fact that its bad, sure maybe neither of us can do better, but learn to respect an opinion


  • Connor Hobbs
    Connor Hobbs Year ago +8

    Looks like shit for $100......actually I bet I could make a better looking one for $20

    • Custom Hardware
      Custom Hardware Year ago

      I actually did one myself, 100$ including the components. i have a video on it on my channel


  • Ork WAAAGH!
    Ork WAAAGH! Year ago

    thing will be charcoal after gaming with an overclock.

  • ddavel5441
    ddavel5441 Year ago

    I like it! Thanks for the info that you need the metal foundations for the mobo and other stuff. Cuz I plan to build a wood case, and will carve up an older Dell case :)

  • Suck me please
    Suck me please Year ago

    i'd like to shave it and use it as tinder

  • mambaChannel
    mambaChannel Year ago

    wooden pc

Analyse website